×
Preparation and safety inspection before starting work
Adequate preparation and full safety checks before commencing operation is the foundation for a smooth continuation of subsequent processes.
1. Personal protective equipment inspection and wearing
Operator must wear laser protective goggles that are compatible with the wavelength of the equipment's laser, safety shoes, cut resistant gloves, and appropriate hearing protection devices to meet safe operation minimum requirements.
2. Work environment inspection
The operator must check the work area of the equipment for cleanliness. Ensure that there are no tools, waste, or residual flammable items within reach. Check and confirm that the smoke exhaust and dust removal apparatus is properly connected, and has been powered on and is operating normally.
3. Equipment status confirmation
Check that the auxiliary gas (for example, oxygen, nitrogen, or compressed air) supply line is properly connected, with the pressure value set to meet the process parameters of the material in question, and check for leaks.Check laser focusing lens and cutting nozzle for cleanliness, contamination, and damages. Check equipment cooling system (e.g. water chiller) to ensure normal operation and temperature in range.
31
Jul
06
Aug
28
Sep
28
Sep
"Previously, we would take 8+ hours a day to cut 16-gauge stainless steel parts with our old plasma cutter. Now this laser takes 2 hours to cut the entire job. The accuracy is remarkable- no more filing down rough edges or having to re-do parts because of uneven cuts; Our customers keep mentioning how clean the end products look, and we have gained 3 new high-end clients in the 6 months we have owned it. Setup was easier than I anticipated - their team literally held our hands through the whole process via video call. Worth every dime for a small business like ours!"
"I used to create every custom order by hand with a jigsaw—tedious, slow and hard to be precise with tiny details. The laser cutter has completely changed my art business. Last month, I made a 3ft wide metal mandala with over 100 tiny cutouts. The same thing would have taken me 3 days to do by hand only took me 2 hours to do on the laser. The best part is, the laser can cut thin gauge aluminum, brass and mild steel, so I can offer clients a greater selection of materials. I get compliments every week on the crisp edges!"
EN
