×
![Sheet Laser Cutting Machine Price [2024] | Get A Free Quote Today](https://shopcdnpro.grainajz.com/category/446227/3604/37704cdd53e0b860b7ff72057c8ff1bd/1.webp)
Preparation and safety inspection before starting work
Adequate preparation and full safety checks before commencing operation is the foundation for a smooth continuation of subsequent processes.
1. Personal protective equipment inspection and wearing
Operator must wear laser protective goggles that are compatible with the wavelength of the equipment's laser, safety shoes, cut resistant gloves, and appropriate hearing protection devices to meet safe operation minimum requirements.
2. Work environment inspection
The operator must check the work area of the equipment for cleanliness. Ensure that there are no tools, waste, or residual flammable items within reach. Check and confirm that the smoke exhaust and dust removal apparatus is properly connected, and has been powered on and is operating normally.
3. Equipment status confirmation
Check that the auxiliary gas (for example, oxygen, nitrogen, or compressed air) supply line is properly connected, with the pressure value set to meet the process parameters of the material in question, and check for leaks.Check laser focusing lens and cutting nozzle for cleanliness, contamination, and damages. Check equipment cooling system (e.g. water chiller) to ensure normal operation and temperature in range.
31
Jul
06
Aug
22
Aug
22
Aug
"Previously, we would take 8+ hours a day to cut 16-gauge stainless steel parts with our old plasma cutter. Now this laser takes 2 hours to cut the entire job. The accuracy is remarkable- no more filing down rough edges or having to re-do parts because of uneven cuts; Our customers keep mentioning how clean the end products look, and we have gained 3 new high-end clients in the 6 months we have owned it. Setup was easier than I anticipated - their team literally held our hands through the whole process via video call. Worth every dime for a small business like ours!"
"We used to rely on third parties to do all our sheet metal cutting—we waited 3-5 days for parts, experienced delays and paid highly markup prices. Now that we have the laser, we can cut parts in house on our deadlines. Most recently we needed to do an emergency HVAC repair, we needed a custom duct fitting by 2PM — we designed it at 10AM, cut it by 11AM and finished the job on time. The machine is easy to learn; my team of 5 (without any experience) learned how to use the machine in one day with the training videos they include. We saved more than $12,000 in outsourcing costs in just 8 months; it was the best investment we have made in our operations."
EN
